Safe packaging disposal:
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are out of their
reach and disposed of safely.
Inspection:
Unwind the cord to its full length and inspect it for damage. Do not
use the appliance if the appliance or its cord have been damaged or are not
working properly.
In case of damage, contact our after sales support line for
advice on examination, repair or return of the damaged product.
Assembly
Your new fan has been shipped partially assembled to reduce wastage of
packaging material, paper cartons and weight. Follow the drawing above to
assemble it; the illustration opposite shows how all the parts fit together.
1. Unscrew guard lock and remove it from the motor shaft.
2. Position the rear guard through the motor shaft against the motor housing,
placing the vertical holes in the guard over the two pins on the housing. Make
sure the handle is on top. Screw on the guard lock in clockwise direction to hold
the rear guard securely in place.
3. Place the blade on the motor shaft. Secure the blade with the blade lock,
turning it anticlockwise to tighten.
4. Assemble the logo ring on front guard , then assemble front guard and rear
guard together by tighten the guard nut . Finally assemble the safe screw and
nut at the bottom of guard.
OPERATING INSTRUCTIONS
BOPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into AC220-240V wall outlets.
Speed Control
Speed is controlled by the button switch. (0=OFF, 1=Low, 2=Medium, 3= High).
To turn the fan on, press the desired button switch.
(1= Low, 2=Medium, 3= High).
Oscillation Control
To make the fan oscillate, push down on the oscillation knob located on the top
of the motor housing. To stop the fan from oscillating, pull up on the oscillation
knob when the fan is in the desired position
