- 5 -
Installation Instructions
Before using your wine cooler:
Remove the exterior and interior packing
Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
To level your appliance, adjust the front legs at the bottom of the appliance.
Operating Your Wine Cooler
The Control Panel:
To control the upper zone temperature, press UP and DOWN button on the left side where Upper Zone (Zone I) wordings
is. Each press would adjust the temperature by 1°C among 5~10°C or 1°F among 40~64°F.
To control the lower zone temperature, press UP and DOWN button on the right side where Lower Zone (Zone II) wording
is. Each press would adjust the temperature by 1°C among 10~18°C or 1°F among 50~64°F.
To turn on or off the internal LED lighting, press LIGHT button on the right side.
To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/F button.
The Display Panel:
On the display panel in middle of the control panel, you can read the following information and adjust the
temperature setting according to your condition:
