Before First Use
Before using the appliance for the first time and also after a long period
of non-use, prepare several cups of water (without any coffee) to rinse
the system through completely:
Espresso and cappuccino maker
•
Place the filter in the filter holder
•
Engage the filter in the filter holder on the left facing the external
marking and turn it firmly to the right
•
Place a large enough container under the filter holder.
•
Turn steam knob to closed position
•
Press “1cup/2cup” button on, then continue to press “ESPRESSO”
button. The pump is then activated. If the boiler (water heating
system) is empty (on first use for example) it will fill with water with a
characteristic filling noise. The water contained in the boiler is
evacuated via the steam nozzle.
•
AS soon as the water is running out of the filter holder, press
Espresso button off.
•
Allow the appliance to finish heating the water.
•
Once the “ESPRESSO” light is off, Press “ESPRESSO” button
again, allow 1 cup water to run through; repeat same action to allow
the equivalent of 2 to 3 cups of water to run through.
•
Interrupt the process by pressing “ESPRESSO” button again.
To rinse the steam nozzle:
•
Place a container under it
•
Turn the Steam tap to ‘
’ position.
•
Once the “ESPRESSO” light is off. Slowly turn the steam tap to
‘MAX’ direction and allow the steam to escape for about 10 seconds
•
Turn steam knob to closed position
•
Press “1cup/2cup” button until “1cup/2cup” light off .
Drip coffee maker
Before making your first pot of delicious coffee, we recommend
rinsing the coffee maker by running one or two cycles with water only,
without ground coffee in the filter basket. This will remove any possible
dust which may have settled during shipping.
●
Place the filter basket into the basket holder