Morrell SW-MNG-24GE2GSFP, Руководство пользователя

Страница: 6 / 84

5
1.3 External Component Description
1.3.1 Front Panel
The front panel of the Switch consists of 24 x 10/100/1000Mbps RJ-45 ports,2 x SFP
ports,1 x Console port, 1 x Reset button and a series of LED indicators as shown as
below.
Figure 1 - Front Panel
10/100/1000Mbps RJ-45 ports (1~24):
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps.
Each has a corresponding 10/100/1000Mbps LED.
SFP ports (SFP1, SFP2):
Designed to install the SFP module and connect to the device with a bandwidth of
1000Mbps. Each has a corresponding 1000Mbps LED.
Console port (Console):
Designed to connect with the serial port of a computer or terminal for monitoring and
configuring the Switch.
Reset button (Reset):
Keep the device powered on and press down the button for about 5 seconds. The system
restores the factory default settings.
LED indicators:
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the Switch, connection or attached devices.
Figure 2 - LED Indicators