5
FILLING
1
Place the steam generator on a
stable ironing board or table,
with the iron resting on its stand.
2
Release the detachable water
tank by sliding outwards
A
.
3
Remove the anti-scale cartridge
by pulling upwards
B
.
4
Fill the tank to the ‘fill to here’
line with clean tap water
C
.
IN HARD WATER AREAS, THE
USE OF DISTILLED OR
DEMINERALISED WATER IS
RECOMMENDED.
Never use battery topping up
fluid or water containing any
substances like starch or
sugar, or defrosted water from
a refrigerator.
5
Re-install the anti-scale
cartridge and re-position the
water tank on the base unit and
push securely into place. Please
make sure the tank is secure
D
.
6
Always pour out any remaining
water after use.
Re-filling ‘in use’
1
When the water level becomes
low, the pump begins to emit a
loud noise. This is due to air
being pumped instead of water
and is quite normal.
Refilling can be done whilst the
appliance is in operation. It is
not necessary to wait for the
appliance to cool down.
2
Slide out the water tank and fill
(see filling instructions).
Steam ironing
1
Unwind and straighten the
power cord
·
and supply cord
fi
.
2
Slide out the water tank and fill
(see filling instructions).
3
Connect the appliance to a
suitable mains outlet, and
switch on the socket. Turn the
power switch
‚
on the base
unit to ‘
I
’ (on) and the indicator
will glow.
4
The boiler ready indicator light
„
situated above the ‘power
switch’
‚
will also illuminate,
indicating the boiler is on its
heating cycle and will extinguish
when the required temperature
is reached.
5
Turn the temperature dial on the
iron in a clockwise direction,
select dot-2 or dot-3 according
to the recommendation of the
garment label.
6
The iron’s temperature indicator
light
›
goes off when the
required temperature is reached.
7
Depress the steam button
⁄
for
1 minute to clean the steam
generating system (for first time
use). It will be accompanied by
a clicking noise which is quite
normal.
8
Begin first time ironing with an
old towel. It takes about 1
minute to reach the required
temperature.
9
Press the steam button
⁄
for
steam ironing.
10
To switch the unit off, turn the
power switch on the base unit
to ‘
O
’ (OFF).
Dry ironing
1
Connect the appliance to a
suitable mains outlet, and
switch on the socket.
2
Turn the temperature dial on the
iron in a clockwise direction,
select dot-1, dot-2, or dot-3
according to the
recommendation of the garment
label.
3
The temperature indicator light
glows on the iron, indicating that
it is switched on.
A
UK Helpline 0870 060 2614
Replacement Parts 0870 157 6645
Ireland Helpline 1800 409119
For details of other Morphy Richards products, please see our website:
C
B
D
RN42271MUK Rev5:RN42271MUK Rev5 20/11/2009 15:43 Page 5
