6
Remove all packaging and any protective cover from the soleplate
(18)
, if any. Unwind and straighten the
power cord
(6)
.
We recommend for first time ironing that you iron over an old towel.
Stand the iron on its heel
(14)
and locate it on the iron rest plate of your ironing board (if large enough) or
on a heat resistant stand at the same height as your ironing board or below it. Always ensure the iron is on
a firm surface when ironing.
WARNING: Do not use the product on a surface which could be damaged by heat or steam such as
a worktop or a polished wood surface.
If in doubt, contact Morphy Richards.
Unwind and straighten the power cord
(6)
.
Textiles and clothes carry ironing instructions. If not, follow the temperature guide above, but test the
temperature by ironing the hem of the garment or other discreet area first.
It is advised to begin with ‘cool’ fabrics (see above) and work up to higher settings. An iron heats up
quicker than it cools down so you’ll save time.
If you turn the temperature level down from a hot setting to a cooler setting, wait until the temperature
setting indicator
(19)
stops flashing (indicating the correct temperature has been reached) before you
continue ironing.
Location
Usage tips
Before first use
Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International
Textile Care Labelling Code
Temperature guide
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
MAX setting
Temperature level
settings
Do not iron
•
••
•••
Fabric
Nylon, Acetates,
synthetic fabrics
Wool, Polyester
mixtures
Cotton, Linen
Rayon, Rayon
mixtures
Ironing
Iron on wrong side,
if moisture
required, use
damp cloth
(not Acetate)
Fabrics requiring
this setting usually
require steam
pressing.
Steaming
Without steam
Steam level setting
(see step 5 of
‘Using the iron’
on page 8)
No steam
(see ‘Dry ironing’
on page 9)
Low
Medium / High
High
RN305000 MUK Rev1.qxp_IB 17/10/2017 12:10 Page 6
