9
6
Place the Drive Shaft
(9)
with Grater Disc
(13)
onto the Mixing Bowl Spindle
(12)
. Add the
Bowl Lid
(6)
and Motor Unit
(4)
as described in
the ‘In Use’ section on page 6.
Lock the Drive Shaft
(9)
in place when in the
accessory by twisting it clockwise to attach to
the accessory.
Unlock and remove the Drive Shaft
(9)
by
twisting it anti-clockwise and pulling it away
from the base of the accessory.
2
Assembly For Use
Push the Drive Shaft
(9)
up through the base of
the relevant accessory: Beater
(19)
; Chopping
Blade
(20)
; Whisk
(21)
.
WARNING: The Chopping Blade
(20)
is very
sharp.
Place the Drive Shaft
(9)
with locked accessory
onto the Mixing Bowl Spindle
(12)
. Add the
Bowl Lid
(6)
and Motor Unit
(4)
as described in
the ‘In Use’ section on page 6.
Alternatively, if using the Grater Disc
(13)
, clip
the relevant Grater Blade
(16/17/18)
into the
Grater Disc
(13)
. To remove, press down on the
latch and push the back of the Grater Blade
(16/17/18)
.
WARNING: The Slicing Blade is very sharp.
The Grater Disc Adaptor
(15)
locks into place
with the Grater Disc
(13)
in the same way that
the other accessories lock onto the Drive Shaft
(9)
in step 2. Once locked into place, place on
top of the Drive Shaft
(9)
.
4
5
3
1
FP401014MUKRev3.qxp_Layout112/07/201812:21Page9
