7
7
4
WARNING: Before switching ON, ensure the
floorhead is located safely away from persons
or animals.
Plug in at the mains outlet. Switch the product on
using the on/off button
(13)
. The low steam level
indicator light
(11)
will illuminate and steam will
be ready to be emitted from the floorhead after
around 30 seconds.
Select the desired steam level by pressing the
steam level select button
(8)
until the indicator
light next to your desired level is illuminated:
low steam
(11)
, for use on laminates and wood.
medium steam
(10)
, for use on vinyls or carpets.
high steam
(9)
) for use on ceramics.
Operate the trigger intermittently to prevent
over-wetting the floor, enabling faster drying.
Never hold the steam cleaner continuously in one
place, as excess moisture and heat may
adversely affect some floor surfaces.
5
Hold the floorhead
(22)
to the floor with your foot
and tilt the steam cleaner back.
Press and hold the steam trigger
(1)
to emit
steam from the floorhead. To stop steam, release
the steam trigger.
Move the steam cleaner backwards and forward
across the floor.
Steam cleaning floors (continued)
You may steam your floors whilst simultaneously
sweeping.
To start or stop sweeping, press the sweeper
on/off button
(23)
.
Use the steam trigger
(1)
whilst the sweep
function is activated.
Steam cleaning and sweeping floors combined
Remove the water tank
(16)
by pushing up the
water tank release slide
(14)
, then pull the water
tank forwards and out using the water tank
removal grip
(15)
. Once removed, turn the water
tank upside-down and unscrew the cap on the
base. Fill the water tank.
IMPORTANT: To prevent limescale build-up in
the water tank, never fill the steam cleaner’s
tank with anything other than deionised,
demineralised or distilled water (available from
most leading supermarkets). Any problems
arising from limescale will invalidate the product
guarantee.
Replace the screw cap firmly and return the water
tank into the main body
(12)
.
3
VC720503MUK Rev1_Instruction Book 09/08/2013 09:30 Page 7
