8
Using the Steam Generator (continued)
The steam function is ideal for relaxing the fibres
of tougher fabrics (like jeans and linen) and getting
rid of those stubborn, hard to reach creases.
To produce a steam boost during ironing, simply
double-press the steam trigger
(4)
. To deactivate
the boost, press once on the steam trigger again.
The appropriate steam level indicator will flash
whilst the steam trigger is pressed, indicating that
steam is being produced.
NOTE: steam cannot be produced on the 1-Dot
setting - this is highlighted by the no steam
indicator
(21)
being visible on the control panel
(8)
whilst the 1-Dot setting is selected.
When using the steam function and replacing the
iron
(5)
back onto the iron rest plate
(10)
, residual
steam may create condensation on the base. This
is not the iron leaking and is normal.
ALLOW TO COOL
6) Steam boost
When you have finished ironing, disconnect the
plug from the mains outlet.
NOTE: The product may occasionally produce a
pumping sound during steam ironing. This is
normal and is caused by water being pumped
from the water tank to the steam generator.
If
the pumping sound suddenly becomes louder
or the steam diminishes, check and refill the
water tank if it has become empty.
7) Switching off
IntelliTemp
setting
Dot 1
Dot 2
Dot 3
Max
4) Temperature and steam level
The appropriate temperature setting indicator
(22/23/24/25/31)
will flash until the desired
temperature is reached. Begin ironing when the
temperature indicator illuminates constantly. If you
turn the temperature down, wait until the temperature
indicator stops flashing before continuing ironing.
The steam level is automatically adjusted to suit the
selected temperature setting. This is denoted by the
steam level indicators
(26/27/28)
on the control panel
(8)
, which will change along with the temperature
setting indicators when you select your desired
temperature level. Press and hold the steam trigger
(4)
for constant steam.
5) Unlocking the iron
Unlock the iron
(5)
from its storage position on top
of the base unit
(17)
by rotating the iron-to-base
lock
(11)
- this enables you to lift the iron heel
(7)
away from the iron rear docking hook
(9)
.
During use, the iron may be rested on the iron rest
plate
(10)
with the iron-to-base lock rotated so the
flat side is upper-most (in the unlocked position).
4
RN333300 MUK Rev3.qxp_IB 05/06/2018 09:37 Page 8
