manualshive.com logo in svg

Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1, Руководство пользователя, Страница: 6 / 8

Поделиться
Скачать
Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1 Скачать руководство пользователя страница 6

6

3

Remove the top mesh
filter as shown 

I

.

Gently brush the
mesh clean. The
pleated filter can be
gently knocked
against the side of the
dustbin to remove
excess dust.

To refit the filter, reassemble and locate

into the hole in the top of the dust container.

•

The filter should be regularly washed
in cold water and left to air dry before
inserting back into the machine.

IMPORTANT: Do not use detergents to

clean the filter. The filter must be thoroughly
dry before the machine is used. 

A spare filter is provided.

IMPORTANT: The dust container will not

lock back onto the machine unless the filter
is fitted correctly.

Pre-motor filter

An additional pre-motor filter is located

underneath the dust compartment lid. Lift

up the lid, the filter is located to the rear. 

J 

This should only require occasional

cleaning. Remove and shake rigorously to
clean.

Cleaning the exhaust
filter

The exhaust filter 

‰

is located at the

back of the product. To remove, press the
clip and pull the filter cover away from the
product. 

K

Remove the filter. 

The exhaust filter is non-washable. Clean

by shaking over a dustbin. To remove fine
dust use the crevice tool brush to gently
clean between the pleats. 

It is recommended that the exhaust filter

is replaced every 6 months or sooner if it
becomes damaged.

IMPORTANT
• All filters should be checked regularly for

signs of damage, preferably after each
cleaning task. The filters must be
replaced immediately if they become
damaged.

• Always disconnect the cleaner from the

mains when checking filters.

• Always make sure all filters are fitted

before use. Failure to do so may result in
damage to your product.

K

I

J

orb cyclone 73171M REV 1   30/7/04  11:36 AM  Page 6

Содержание ORB PETS CYCLONE VACUUM CLEANER - REV 1









Отзывы:

Нет отзывов