Morphy Richards MRC350, Инструкция по эксплуатации

Страница: 6 / 12

6
1. When using the food processor - place the correct sized bowl relevant
to the amount and type of ingredients needing to be chopped, onto the
rubber bowl holder mat and then install the blade assembly into the spindle
at the bottom of the bowl. When using the food processor, please do not
touch the blade as it is very sharp.
2.
If processing cooked food, please ensure the food has been cooled to near
room temperature prior to placing into the bowl.
3. Close the bowl lid, and install the motor assembly by aligning the bumps
on the bowl lid with the small round dots at the side of the motor assembly.
Adjust positioning as required until the motor assembly is locked into
position.
4.
Always securely hold the base of the unit steady with one hand, then hold
and press the “Power button” briefly to chop the food.
NOTE: This appliance is equipped with a pulse button, please avoid
running the motor continuously for more than 30 seconds. The longer the
continuous operation, the finer the texture of the food. For coarse textured
food, please process in short bursts.
5. Please make sure that the blade has stopped rotating completely before
opening and removing the bowl lid. Unplug the appliance prior to detaching
the motor assembly. Handle the blade assembly only by the plastic support
when removing from the bowl. Empty the food - please do not use the bowl
for food storage.
NOTE: When operating, please make sure that the three slots on the bowl
lid align with the indentations on the bowls. Do not close the bowl lid by
force if they are not aligned. After use, the bowls can be stacked inside
each other for storage.
Before using this product for the first time, please:
1. Clean all bowls and blade assembly with warm soapy water, and dry
thoroughly.
NOTE: All bowls can be placed in the dishwasher
2. The motor assembly should be wiped down with a damp cloth . The blade
assembly can be rinsed under running water.
NOTE: The motor assembly should not be immersed into water.
INSTRUCTIONS FOR USE
OPERATING INSTRUCTIONS