5
How to use
1
Ensure the blanket is fitted to the bed
correctly. Move the slider switch to the
‘OFF’ position
2
Plug the power lead into the closest
socket, using an extension lead if
needed to ensure that the lead is not
stretched.
Start up
1
When plugged in, the red power LED will
illuminate. The switch is already in time
set mode.
2
Select the appropriate hour AM/PM by
using the down arrow
‹
A
or the up
arrow
‹
B
. Press the mode button
fl
The minute symbol will then flash, select
the appropriate time. Press mode again
and the clock will be set.
Heating the bed
1
Move the slider switch to the ‘ON’
position the green LED
‡
will illiuminate
and heat level 1 is automatically
selected.
2
Select the heat required using the up
and down arrow buttons level 1-9
NOTE: Make sure when you get into bed
that the blanket is switched off, or
reduced to level suitable for all night use
(1-4).
Switch control
Features
⁄
LCD screen with back light.
¤
Standby/ON LED.
‹
A
Down Arrow
B
Up Arrow
›
Slider switch OFF, ON, SLEEP TIMER
fi
Boost button.
fl
Mode button
‡
Blanket active LED
¤
‹
a
⁄
fi
›
‡
fl
CLOCK
7.30
PM
z
7.30
PM
ON
3
z
‹
b
75237 rev1 16/3/06 3:42 PM Page 5
