Underblanket without
tie tapes
•
Use only as an underblanket and do not
use above the occupant of the bed.
• WARNING: Ensure the blanket is not
folded, rucked or creased. When in
use do not cover with pillows.
Fitting instructions
1
Place the blanket directly on the
mattress, with the control switch end at
the head of the bed.
•
The blanket must be secured to the
mattress in the following manner. Place
the blanket directly on the mattress and
ensure that a space of 10-15cm (4-6
inches) is left between the bottom edge
of the blanket and mattress (see diagram
A
).
Mattress covers with
elasticated corner tapes
1
Place the mattress cover directly on the
mattress with the control switch end at
the head of the bed.
2
Turn the elastic corners underneath the
mattress to secure in place (see diagram
B
).
•
Ensure all creases are smoothed out.
4
B
10-15 cm
4-6 inches
A
S7 Rev 2 21/7/04 1:56 PM Page 4