manualshive.com logo in svg

Morphy Richards IB75101, Инструкция по эксплуатации, Страница: 5 / 8

Поделиться
Скачать
Morphy Richards IB75101 Скачать руководство пользователя страница 5

5

Switch control

How to use

1

Ensure the blanket is fitted to the bed
correctly.

2

Plug the power lead into the closest
socket, using an extension lead if
needed to ensure that the lead is not
stretched.

Preheating the bed

1

Move the heat setting on the control
switch to heat level 3 or 4, depending on
the level of the heat required. Allow
approximately 60-90 minutes for the
blanket to heat the bed thoroughly,
although this time may vary depending
on the room temperature and type of
bedding used.

All night use

1

Move the heat setting on the control
switch to heat level 1 or 2.

• This setting will provide safe and

comfortable heat to sleep on all night.

• This setting can be used to air the bed.

WARNING: Always ensure that the

heat setting is moved to the OFF
position when you get up the next day,
or after airing the bed.

Braille markings

•

Braille markings are located on the back
of the switch to help identify the
direction of the heat level in the dark, or
if visually impaired.

• The highest heat level 

pre-heat

is identified by 3 raised nodules

mid level

by 2 raised nodules

low level

(all night) by 1 raised nodule.

Features

⁄

Illuminated heat setting light
(To identify heat levels in the dark)

¤

Heat levels 3 & 4 
(Used to pre-heat)

‹

Heat level 1 & 2
(Safe & comfortable to sleep all night)

›

Braille markings
(located on the back of the switch)

fi

Off position

¤

›

⁄

‹

fi

S2 Rev 2  21/7/04  1:49 PM  Page 5

Содержание IB75101









Отзывы:

Нет отзывов