
5
Emptying the Pod
Emptying the Pod
Emptying the Pod
Emptying the Pod
Emptying the Pod
Disconnect the
cleaner from the
mains socket.
Disconnect the
hose from the hose
inlet duct.
Remove the pod by
pushing the pod
release latch.
Remove the filter basket
and empty the pod into a
waste bin.
If the dust is tightly
packed tap the front
cover.
Shake the filter basket into the waste bin, this
will remove most of the dust.
The filter basket can be cleaned further using
the dusting brush (attached to the crevice tool).
If suction is low after cleaning, the filter basket
should be washed in warm water, (no detergent)
and left to dry thoroughly before replacing.
NEVER REPLACE THE FILTER BASKET WHEN
STILL DAMP.
Reassemble
Reassemble
Reassemble
Reassemble
Reassemble
Replace the filter
ensuring that the seal is
good.
Replace the pod onto the
main body.
Changing and cleaning
Changing and cleaning
Changing and cleaning
Changing and cleaning
Changing and cleaning
the other filters
the other filters
the other filters
the other filters
the other filters
This cleaner is fitted with a motor protection
filter. NEVER USE THE VACUUM CLEANER
WITHOUT THIS FILTER IN PLACE.
To clean the motor protection filter
1 Remove the filter from the filter grille.
2 Rinse the filter in lukewarm water and dry
the filter completely.
3 Put the filter back into the filter grille and
reassemble.