Assembly
1
Insert the extension tubes into the
telescopic tube/handle support.
B
2
The tubes twist to extend and lock to the
desired height.
C
3
Push the loop handle on to the top of the
tubes.
D
4
Turn the handle to the desired position.
For use on stairs
1
The loop handle may be connected
directly to the telescopic tube/handle
support for stair cleaning
E
.
Mounting the charging
bracket
1
Select a point in the vicinity of a wall
socket, indoors and not subject to damp.
2 WARNING: Make sure that there are
no hidden services (gas, water,
electricity etc) behind the wall.
3
Position the bracket against the wall and
mark the points at which the fastening
screws are to be inserted.
4
Using a 5.5mm masonary drill, drill holes
30mm deep and insert the two plugs.
5
Secure the bracket using the screws
provided. Do not overtighten.
• The fixings provided are for use with
solid brick walls only. Alternative fixings
for different types of wall construction will
be available from your local DIY store.
4
B
C
D
E
VC70470 Rev 2 14/7/04 3:48 PM Page 4
