Using
Normal use
1
Wherever possible fill through the spout,
as this helps to free the filter from
limescale build-up.
• The integrated water level indicator
allows you to easily see the amount of
water in the kettle.
• Always ensure that the kettle is filled to
at least a level where the water is visible
through the level indicator.
• Boil only as much water as you need as
this saves electricity.
2
Place the kettle on the base unit,
ensuring the kettle locates on to the 360˚
connector.
• The 360˚ connector allows the kettle to
be located at any position. - ideal for left
and right handed users and convenient
positioning on worktop.
3
Plug in and switch on at the wall socket.
4
Switch the kettle on. The ‘power on’
neon, will light up.
5
When the water boils the kettle will
switch off automatically. Depending on
the model variant you have purchased,
the kettle will illuminate and/or 'whistle'
to indicate it has boiled.
• If you are using the kettle for the first
time, pour away the boiled water and
refill.
6
Lift the kettle from the base unit by the
handle ensuring you hold the kettle level.
• To re-boil, switch to ON again. If the
kettle has just switched off wait a minute
or so before switching it back on again.
• If you do not put in enough water, or
switch on the kettle when it is empty, the
safety cut-out will switch off the power
automatically. If this happens, refill and
wait a few minutes for the element to
cool, then use as normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from its location
using the tab provided.
3
To refit the filter, slot it into the side wall
guides and press down firmly. Ensure the
filter is correctly located into the guide.
WARNING: If the filter is fitted
incorrectly, the auto switch off
function may be affected.
Lid Opening
1
To open, slide back the lid handle and
pull upwards.
Whistle feature
Certain models only
•
There is a switch
‚
on the cordless
base of the product that can switch the
whistle on and off as desired.
4
‚
KT43097 Rev 1 21/3/05 3:54 PM Page 4
