Using
Normal use
1
Wherever possible fill through the spout,
as this helps to free the element from
limescale build-up.
• The integrated water level indicator
allows you to easily see the amount of
water in the kettle.
• Always ensure that the kettle is filled to
at least a level where the water is visible
through the level indicator.
• Boil only as much water as you need as
this saves electricity.
2
Place the kettle on the base unit,
ensuring the kettle locates on to the 360˚
connector.
• The 360˚ connector allows the kettle to
be located at any position. - ideal for left
and right handed users and convenient
positioning on worktop.
3
Plug in and switch on at the wall socket.
4
Switch the kettle on. The water level
gauge will illuminate.
5
When the water boils the kettle will
switch off automatically.
• If you are using the kettle for the first
time, pour away the boiled water and
refill.
6
Lift the kettle from the base unit by the
handle ensuring you hold the kettle level.
• To re-boil, switch to ON again. If the
kettle has just switched off wait a minute
or so before switching it back on again.
• If you do not put in enough water, or
switch on the kettle when it is empty, the
safety cut-out will switch off the power
automatically. If this happens, refill and
wait a few minutes for the element to
cool, then use as normal.
Filter removal
1
Open the lid.
2
Slide the filter away from the spout, from
its location, using the tab provided.
3
To refit the filter, slide it into the side wall
guides. Ensure the filter is correctly
located into the guide.
WARNING: Unless the filter is fitted
correctly, the auto switch off function
may be affected.
Lid release
1
To open, press the lid release button
down and the lid will open.
4
KT43015 Rev 2 8/4/05 10:36 AM Page 4
