Shot of steam
Press the shot of steam
button
¤
to obtain a burst
of extra steam for ironing out
creases in heavy material
such as denim etc.
The shot of steam can be
used whilst dry ironing, providing there is
water in the tank, and the temperature
control is set within the steam range.
Do not use shot of steam at
temperatures below the steam range shown
on the control dial.
Note: For optimum steam quality, do not
operate the shot more than three times in
succession.
Vertical steam
Hold the iron in a vertical position
between 1cm and 2cm away from the item
D
. Press the shot of steam button
¤
, this
will create vertical steam. This feature is
especially useful for removing creases from
hanging clothes, curtains, wall hangings,
etc.
Note; For optimum steam quality, do not
operate the shot more than three times in
succession.
No drip system
Your iron is fitted with a no drip system
which is designed to prevent water
escaping from the soleplate when the iron is
too cold.
During use, the no drip system may emit
a loud click, particularly during heat-up or
whilst cooling down. This is perfectly
normal and indicates that the system is
functioning correctly.
Auto shut-off
Your iron is fitted with the auto shut-off
function it will automatically shut down after
a set period. The ‘safety switch off’ led will
flash on the function panel.
If the iron is left unattended in the
horizontal position it will shut down after 30
seconds.
If it is left in the vertical position it will
shut down after 8 minutes.
To reactivate the iron gently shake it and
wait for the iron to heat-up as normal.
Life long anti-scale
system
The life long anti-scale system reduces
scale deposits and helps prolong the life of
the iron.
6
D
40715 Rev 1 31/5/05 9:11 AM Page 6
