6
Using the Express Steam Pro (continued)
Hold the hotplate
(2)
around 1 inch from the
surface of the garment. Pass the Garment
Steamer over the garment whilst steaming, you
may need to do this a few times to remove more
stubborn creases.
Occasionally brush the garment with the brush
accessory to help relax the fibres.
WARNING: Do not direct steam at animals or
people. Do not steam clothes that are being worn.
For extra steam to tackle stubborn creases /
heavy fabrics, increase the steam output by
turning the steam dial
(17)
to the higher settings.
There are three steam settings: low; medium;
high.
5) Steaming
6) Steam level selection
Once finished, turn the steam dial
(17)
to ‘O’
and unplug from the mains to switch off.
8) Switching off
The handheld steamer
(4)
can be stored in
the handheld steamer rest
(6)
in-between
selecting garments and to cool when the
unit is switched off.
7) Handheld steamer rest
Emptying and storing
When you have finished steaming, unplug from
the mains outlet. Allow the unit to completely
cool, then empty all water from the removable
water tank
(14)
. Hold the water tank handle
(16)
and lift the removable water tank up from the base
(18)
. Turn the removable water tank upside down to
reveal the filling hole valve
(12)
. Unscrew the filling
hole valve and remove. Empty the water tank via
the filling hole
(13)
. Then, replace the filling hole
valve, screwing it firmly into place. Turn the water
tank upright again and firmly press back into
position.
NOTE: It is normal for residue water to collect in the
reservoir in the base
(18)
. The water can be removed
by opening the descale plug
(20)
(see page 7).
Maintenance
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 6
