Overheating
protection
If the motor overheats, the
cleaner will switch off
automatically. If this occurs,
press the on/off switch,
disconnect from the mains
supply and leave for 45
minutes to allow the motor
to cool down.
The likely causes of the
cleaner overheating are:
•
The nozzle or tubes are
blocked
•
The dustbag is full
•
The motor protection filter
is very dirty
•
The exhaust filter is very
dirty
Check and rectify the
problem before attempting
to reuse the cleaner.
IMPORTANT: Do not use
your vacuum cleaner
without the filters fitted.
After Vacuum
Cleaning /
Switching off
K
Turn the motor off by
pressing the button
‚
.
Remove the plug from the
mains supply and follow
the ‘Cable rewind’
procedure below.
Cable rewind
K
Switch off the appliance.
Remove the plug from the
mains supply and rewind
the power cable using the
cable rewind switch
‡
.
WARNING: When using
the cable rewind,
always hold the plug as
the cable will rewind
quickly.
Power setting
Application
Curtains and
delicate fabrics
Textiles and
upholstery
Floor coverings,
such as rugs,
economy setting
for carpets
Carpets or hard
floor coverings
5
Controlling suction
power
The Eco Switch
·
allows you
to turn down the power when
cleaning more delicate items,
such as curtains and upholstery,
saving energy and reducing
running costs. See table (right)
for guideline settings.
The suction power can also be
adjusted using the fingertip
control on the handle
J
.
Closed
: full suction
Open
: reduced suction
Recommended
settings
Alter the power setting to suit
the surface, see guide table
(right).
K
‡
‚
J
‹
open closed
70255 rev1 12/9/07 09:49 Page 5
