5
Using the accessories
Attach the stair tool
ı
to the
hose handle
Í
for effective stair
cleaning.
Attach the hair tool
ˆ
to the
stair tool
ı
for fantastic pet hair
pick-up
F
.
Attach the soft dusting brush
˜
to the stair tool
ı
for a softer
pick-up
F
.
Attach the stubborn dirt brush
¯
to the stair tool
ı
to attack
stubborn ground in dirt
F
.
Attach the upholstery brush
˘
to the stair tool
ı
for effective
upholstery cleaning
F
.
Attach the crevice tool
Û
to the
hose handle
Í
or tubes to
access narrow or hard to reach
places.
Attach the small turbo nozzle
Ú
to the hose handle
only
for use
on upholstery and stairs.
WARNING: The small turbo
nozzle should not be used
with the extension tubes.
Attach to the hose handle
only.
Cleaning the turbo
nozzle
The turbo nozzle should be
regularly cleaned and any hairs
or fibres wrapped around the
brush bar removed to maintain
optimum performance. To aid
cleaning, the turbo nozzle can
be opened up by pushing the
button on the nozzle forwards.
DUST CANISTER
Emptying
1
Every time the dust canister is
emptied, rotate the filter
cleaning dial
fi
several times
clockwise before emptying
G
(this will agitate the fine dust
between the filter pleats and
restore the air flow).
2
Remove the dust canister from
the product by pressing the
canister release button
H ›
.
3
Turn the lid quarter-of-a-turn
anti-clockwise to unlock, lift off
the lid with the pleated filter
I
.
4
Empty the canister into a
dustbin.
5
Re-fit the dust canister and
push back into position.
Allergy sufferers
When emptying any vacuum
cleaner, it is difficult to avoid
exposure to dust. To minimise
this risk, please ensure that you
encase the dust canister in a
large bag to empty it. Close the
bag as tightly as possible round
the dust canister. Remove the
dust canister and close the bag
as tightly and quickly as
possible and dispose of this
immediately. It is advisable to
wear disposable gloves and a
face mask while emptying the
cleaner. If at all possible, ask a
non allergy sufferer to empty the
dust canister when required.
FILTERS
Cleaning
To maintain suction, the pleated
filter must be cleaned using the
cleaning dial each time the dust
canister is emptied. To clean,
turn the filter cleaning dial
fi
clockwise several times
G
before emptying.
Pleated filter
In addition to cleaning the
pleated filter with the cleaning
dial each time the dust canister
is emptied, it is recommended
to regularly remove and wash (or
thoroughly brush off) the pleated
filter.
To thoroughly clean the filter, it
can be washed in warm water
(no detergent). Leave the filter to
air dry. Ensure the filter is
thoroughly dry before refitting.
See ‘Cleaning the dust canister
filter assembly’ section for a
description of how to access
the pleated filter.
G
I
fi
›
F
Í
ˆ
ı
H
˜
¯
˘
73383 rev1 29/4/08 15:48 Page 5