6
•
Switch off your coffee maker and allow 3 minutes
to cool before refilling with cold water.
Refilling your coffee maker
4
After setting is complete, the machine will
beep and display the selected time for 3
seconds before switching back to the current
time. To cancel this program, press the
Program/Clock Button
(11)
again so the
‘PROGRAM’ icon disappears.
3
The default time will show 12am. Use the Up
(14)
and Down
(15)
buttons to change the
time and press Program
(11)
to confirm.
2
Press the Program/Clock Button
(11)
, the
Screen will display ‘PROGRAM’.
To pre-set a brewing time
1
Follow ‘Using your coffee maker - Quick Start’
steps 1-3 on page 5.
Ensure the clock is set before attempting to pre-set the brewing time.
Follow the ‘Setting the clock’ instructions on page 5.
•
You can adjust the brew strength for any volume
of coffee (from 1 cup to a full 12 cup carafe). To do
this, follow the steps below:
1
Press the Strength Selector Button
(12)
once,
the display screen will flash STRENGTH
and show icon.
2
To choose between strengths, use the Select Up
and Down
(14 & 15)
Buttons.
3
Press the Strength Selector Button
(12)
to
confirm.
•
However, if you are brewing 1-4 cups, the machine
can automatically set the optimum program for
you. This is specially adapted for small quantities.
Follow the instructions below:
•
For brewing 1-4 cups of coffee, press and hold
the Strength Selector Button
(12)
for 3 seconds.
The screen will display . The machine will
automatically adjust the cycle.
Using the Strength Selector
162008 REV 2.qxp_Layout 1 25/05/2016 12:08 Page 6
