5
Attaching accessories
WARNING: Always switch the unit off
and wait for the steam to disperse before
attaching and detaching accessories.
WARNING: Never direct steam at
electrical components/fittings. If in doubt
about the suitability of steam for
cleaning an appliance, contact the
appliance manufacturer for advice prior
to cleaning.
IMPORTANT: It is strongly recommended
that after fitting the new attachment, the
hose end is held over the sink initially as a
small amount of hot water may be ejected
before the steam reaches full pressure.
1 Jet nozzle
Attach the jet nozzle
Ê
to the hose end
fi
by lining up the lugs and twisting to
lock in place
E
.
The jet nozzle is ideal for:
• General cleaning tasks, for work
surfaces, tile grouting and for awkward
corners and spaces.
• Defrosting freezers and removing dust
from plants.
The closer you hold the jet nozzle to the
surface to be cleaned, the better the
cleaning results.
The following accessories can be added
onto the jet nozzle by simply pushing to fit:
2 Directional nozzle
Push the directional nozzle onto the jet
nozzle
F
.
The directional nozzle
Á
is ideal for
getting steam into awkward spaces and for
directing steam under the lip of sink/toilet
bowls, grout, tap ware, venetian blinds, and
sliding door runners.
3 The round brush
Push the round brush onto the jet nozzle
G
.
The round brush
Â
is ideal for hob
cleaning and tile grouting depending on the
application.
4 Upholstery nozzle
Alternatively, the upholstery nozzle
È
can be attached to the hose end
fi H
.
• This can be used for cleaning upholstery
or removing creases from clothing.
• Place garments onto a clothes hanger
and spray steam at a distance of around
10-20cm.
E
F
G
H
70455 Rev 1 13/9/07 14:43 Page 5
