Morphy Richards 47507, Руководство пользователя

Страница: 7 / 20

7
www.morphyrichards.com
To make hotter coffee the coffee
maker can be preheated. Follow the
procedure for making espresso
coffee, without coffee in the filter
holder.
Descaling
It is important to descale as the
performance of your coffee maker
may be impaired by limescale and
other impurities in the water supply.
If you live in a hard water area, we
recommend that your coffee maker
is descaled at regular intervals, e.g.
every 2-3 months. In areas of
moderately hard water you should
descale every 6 months.
If the water filters through more
slowly than usual, it is a sign that
descaling is necessary.
We recommend you use proprietary
liquid descaler which is especially
made for coffee makers and plastic
kettles. Follow the instructions on the
bottle or sachet, and then operate
the coffee maker with just water 3
times before making coffee.
Do not use kettle descaler unless the
packet specifically states it it suitable
for coffee makers.
• The permanent filters should not be
used during descaling.
Cleaning and
maintenance
You must clean the steam nozzle
and froth attachment immediately
after each use.
1 Wipe the steam nozzle, warming
plate and exterior with a clean,
damp cloth. Do not use any
abrasives or metal scourers as
this will damage the finish on the
coffee maker.
Briefly push the lever to the steam
setting to clear any remaining milk
out of the steam nozzle.
WARNING: Steam from the
nozzle is extremely hot and can
scald.
2 Place the froth attachment under
warm running water to remove
excess milk.
IMPORTANT: No parts are suitable
for cleaning in a dishwasher.
3 The filters, filter holder and water
reservoir should be washed after
each use by rinsing them under
water.
• To assist in keeping the filters clean
we recommend you periodically run
the coffee maker with the filter in
place, without coffee, using water
only.
• Should the holes in the filters
become blocked with coffee
granules use a fine bristled brush.
• When your coffee maker is not
being used, we recommend that
you do not leave the filter holder
attached to the coffee maker as this
will reduce the life of the gasket.
Drip tray
1 The water level indicator · appears
through the grid to indicate that the
drip tray
Ë is full.
2 Remove the grid of the drip tray by
placing fingers in the two holes in
the centre of the drip tray and lift off
R . This must be done regularly or
as soon as the red water level
indicator appears through the grid.
3 Lift the front of the drip tray up and
slide it out
S .
4 Lift off the plastic lining of the drip
tray
T . Clean the drip tray and its
grid with water and a little washing
up liquid, rinse and dry.
5 Reverse the procedure to
reassemble.
• Ensure that when you are replacing
the drip tray that the plastic lining is
in the correct position.
47507MCZ-Rev1-PumpEspresso 25/9/06 4:20 pm Page 7