10
UK He
l
p
l
ine 0844 871 0960
R
ep
l
ace
m
ent Parts 0844 873 0726
Ire
l
an
d
He
l
p
l
ine 1800 409 119
10
3.
Lightly tamp the coffee grounds using the
Coffee Tamper
fi
. Alternatively let the smart
press system built into the brewing head ensure
your coffee is tamped the correct amount as
part of the coffee making process.
4.
Attach the Filter Holder
fl
to the Brewing Head
›
by placing the ears into the two notches and
turning the handle firmly from the left to right.
5.
Place coffee cup(s) under the Brewing Dispenser
‰
on the Drip Tray Grid
‡
.
6.
Select the memory setting (P1/P2) by pressing
the Coffee Quantity Selection button
ı
.
7.
Press the Brew Button
¯
.
8.
The espresso coffee will be dispensed from the
Brewing Dispenser
‰
and the Brewing Icon
˘
will display on the LCD Screen.
9.
Brewing will stop automatically and two beeps
will sound when machine has finished
dispensing the espresso and the Brewed Icon
◊
will display on the LCD Screen.
10.
Remove the filter holder
fl
by turning from right
to left and throw out the used ground or pod
coffee. Clean the filter holder with water.
Preparing / frothing milk for a
cappuccino.
The water required for steam is a much higher
temperature than the water temperature used to
prepare espresso. Therefore you should prepare
your espresso first so the coffee isn’t burnt.
1.
Prepare your coffee as normal, using a larger
cup.
2.
Select the Steam Setting by pressing the Steam
Button
˜
, a beep will be heard.
3.
The Standby Indicator
È
will rotate to indicate
that your coffee machine is heating up. It will
stop rotating and a beep will sound when the
steam function is ready to be used.
5.
Place a stainless steel jug containing the milk
under the steam nozzle
„
, immerse the nozzle
just below the surface of the milk.
K
Note:
Move the Steam Nozzle/ Cappuccino accessory
with the black handle.
L
WA
R
NING: Stea
m
Nozz
l
e is ver
y
hot!
6.
Turn the Steam Control slowly
Â
to the MAX
position.
Note: the Stea
m
nozz
l
e
m
akes
l
o
ud
noise
an
d
can ca
u
se hot
m
i
l
k to spit an
d
sp
l
ash
as air is
f
orce
d
into the
l
iq
u
i
d
.
7.
When the milk is hot enough and enough froth
has appeared, turn the Steam Control back to
the OFF position.
9.
Remove the nozzle from the jug. Pour the frothy
milk into the espresso coffee. The cappuccino is
prepared.
10.
Press the Standby button
Û
to exit the Steam
Function.
11.
Ensure you wipe the nozzle clean after it has
cooled. It is also advised that you rise the steam
nozzle after frothing milk, see Cleaning and
Maintenance on page 13.
The Steam Nozzle/ Cappuccino accessory can
be adjusted using the black handle.
L
NOTE:
If the water level in the tank reaches the
minimum level, the machine will stop working,
the Low Water Level Indicator Icon
will flash
on the LCD screen, and a beep will sound.
WA
R
NING: Stea
m
Nozz
l
e is ver
y
hot!
L
Á Ë
È
Í
Î
Ï
Ì
Ó
Ô
Ò
Ú
Û
Ù
ı
ˆ
˜
¯
K
47020 rev4_x 28/09/2010 11:41 Page 10
