•
The 360° connector allows
the kettle to be located at
any position. - ideal for left
and right handed users and
for convenient positioning
on the worktop.
3
Plug in and switch on at
the wall socket.
4
Switch the kettle on.
5
When the water boils the
kettle will switch off
automatically.
•
If you are using the kettle
for the first time, pour away
the boiled water and refill.
6
Lift the kettle from the base
unit by the handle ensuring
you hold the kettle level.
•
To re-boil, switch to ON
again. If the kettle has just
switched off wait a minute
or so before switching it
back on again.
•
If you do not put in enough
water, or switch on the
kettle when it is empty, the
safety cut-out will switch
off the power automatically.
If this happens, refill and
wait a few minutes for the
element to cool, then use
as normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from
its holder.
3
To refit the filter, slide it into
the side wall guides of the
filter holder until it clicks
into place.
WARNING: Unless the
filter is fitted correctly,
the kettle lid may not
close and lock securely.
Descaling
IMPORTANT: As this kettle
is fitted with a concealed
element it must be
descaled regularly. The
frequency of descaling
depends on usage and the
hardness of the water in
your area.
Excessive scale can cause
the kettle to switch off
before boiling and may
damage the element
invalidating the warranty.
It is essential that regular
descaling takes place.
Remove hard scale using a
proprietary descaling
product suitable for
stainless steel kettles.
Alternatively use citric acid
crystals (available from
most pharmacies) as
follows.
1
Fill the kettle 3/4 full, boil,
then unplug the kettle
(remove the cordless kettle
from the base unit) and
stand it in an empty sink or
bowl.
2
Add 50gm of citric acid
crystals to the water
gradually, then leave the
kettle to stand. Do not use
a more concentrated
solution.
3
As soon as the
effervescence subsides,
empty the kettle and rinse it
thoroughly with cold water.
4
Wipe the outside of the
kettle thoroughly with a
damp cloth to remove all
traces of acid which may
damage the finish.
IMPORTANT: Ensure that
the electrical connections
are completely dry before
using the kettle.
4
UK Helpline 0844 871 0954
Replacement Parts 0844 873 0720
Ireland Helpline 1800 409 119
⁄
¤
‹
›
fi
fl
‡
·
‚
„
43024 rev2:43024 21/10/2009 13:14 Page 6
