4
BEFORE USE
Sort out the items to be ironed
according to the type of fabric.
This will minimise the frequency
of temperature adjustment for
different garments.
NOTE: The steam facility should
only be used on garments which
are suitable for ironing at the 2
and 3-dot settings (see
‘Temperature guide’ on page 3).
Textiles and clothes are
supposed to carry ironing
instructions. If they don’t, you
should follow the Temperature
guide on page 3, but be sure to
test the temperature by ironing
the hem of the garment or
similar discreet area first.
If you turn the temperature
down from a hot setting to a
cooler setting, wait until the iron
temperature has stabilised
before you continue ironing.
Delicate fabrics such as silk,
wool, velour, etc, are best ironed
with an ironing cloth to prevent
shine marks.
FILLING
1
Make sure that the iron is not
plugged in, then set the variable
steam dial
⁄
to ‘0’ position
before filling the iron with water.
2
Lift up the filler cap
›
and fill
the water through the filling hole
into the water tank
‚
, using the
beaker provided
 A
. The tank
holds 350ml of water. After
filling, replace the filler cap.
IN HARD WATER AREAS, WE
RECOMMEND A MIX OF 50%
TAP WATER AND 50%
DISTILLED OR
DEMINERALISED WATER.
WARNING: Never use battery
topping up fluid or water
containing any substances
like starch, sugar, fragrant
additives or defrosted water
from a refrigerator.
NOTE: Please see point 2 of
‘Exclusions’ on page 8.
3
Always pour out the remaining
water after use.
WARNING: When filling your
iron with tap water, always
use the beaker provided.
Never fill directly under the
tap.
TEMPERATURE
CONTROL
· B
•
Default s 3-dot (cotton)
•
To increase temperature press
the top button.
•
To decrease temperature press
the bottom button.
•
The light panel will flash to
indicate that the iron has not yet
reached the correct
temperature.
•
Once the correct temperature
has been reached, the light will
stop flashing and there will be
one ‘beep’ to signal that the iron
is now ready for use.
FEATURES OF YOUR
IRON
Fast heat up
This iron has a high wattage for
quick heat-up. Once the correct
temperature is reached, the
indicator light will stop flashing
and there will be one ‘beep’ to
signal the iron is ready for use.
NOTE: To prevent burning, do
not use iron before the indicator
light has stopped flashing.
Dry ironing
You can use your iron as a dry
iron only. Make sure the variable
steam dial
⁄
is set to the ‘0’
symbol.
Any temperature setting may be
used depending on the
garment. The spray feature
fi
may be used, provided there is
water in the tank (see ‘Filling’
section). You do not need to put
any water in the tank when dry
ironing only.
A
B
Increase
temp
Decrease
temp
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
RN300002MUK Rev1_Instruction Booklet 21/01/2014 10:46 Page 4
