U
UK
K H
He
ellp
plliin
ne
e
0
08
87
70
0 0
06
60
0 2
26
61
14
4
IIrre
ella
an
nd
d H
He
ellp
plliin
ne
e
1
18
80
00
0 4
40
09
91
11
19
9
7
7
STANDBY
1
1
Press the power button on the
woofer cabinet, unit is in
standby mode.
2
2
Press STANDBY button on the
CD unit (or remote) to switch the
unit on.
3
3
Select the sound source (CD,
AUX, CARD-USB or TUNER) by
pressing FUNCTION button.
The corresponding display will
light up.
4
4
Adjust the VOLUME with the
volume (UP or DOWN) button
5
5
Set the preset equaliser (PASS,
CLASSIC, ROCK, POP, OR
JAZZ) with the EQ button on the
remote.
6
6
Press STANDBY button again on
the CD to turn off the unit.
CLOCK SETTING
In the standby mode.
1
1
Press and hold MEMORY/CLK-
ADJ. button until the time
displays 24-hour digit flashing.
2
2
Press SEARCH/SKIP/TUNING
(DOWN or UP) button to adjust
12 hour or 24 hour digit.
3
3
Press MEMORY/CLK-ADJ.
button again, the time display
HOUR digit flashes, press
SEARCH/SKIP/TUNING (DOWN
or UP) button to adjust HOUR
digit; Press MEMORY/CLK-ADJ
button once more, the MINUTE
digit flashes, adjust it by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
4
4
Press the MEMORY/CLK-ADJ
button again to confirm the
time.
5
5
Each enable state as shown
above will be cleared if the key
is not pushed in 10 seconds.
6
6
In the CD or TUNER mode.
Press and hold the
MEMORY/CLK-ADJ button a
few seconds. To check the
current time.
TIMER SETTING
(on the remote)
1
1
After adjusting clock, press the
TIMER button for a few
seconds, ‘ON and 00:00’
appears on the display and the
HOUR digit flashes.
D.
2
2
Press the
SEARCH/SKIP/TUNING (UP or
DOWN) button to adjust it.
3
3
Press the TIMER button again,
the MINUTE digit will start
flashing, adjust it by pressing
SEARCH/SKIP/TUNING (UP or
DOWN) button.
4
4
Press the TIMER button once
more to confirm/order TIMER
ON time.
5
5
After adjusting ‘TIMER ON’, ‘
OFF’ appears on the display and
the HOUR digit flashes.
E
6
6
Repeat the above steps 2 to 3,
then press the TIMER button
once more to confirm/order
TIMER OFF time.
7
7
Now the TUNER or CD appears
on the display with flashing,
adjust ‘TUNING’ or ‘CD’ by
pressing the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
8
8
Press the TIMER button again,
the timer ‘VOL 15’ indicator
appears on the display and
flashes, adjust the timer volume
high or low by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
9
9
Each enable state as shown
above will be cleared if the
button is not pushed in 10
seconds.
1
10
0
After adjusting ‘TIMER ON” and
‘TIMER OFF’, press the TIMER
button. ‘ ‘ appears on the
display.
1
11
1
The unit will be switched on
automatically at ‘TIMER ON’ and
start playing and the unit will be
switched off automatically at
‘TIMER OFF’.
Note: N.B Not available with
USB or SD.
D
E
29118 rev2 8/8/06 13:05 Page 8
