![Morphy Richards 172251 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/morphy-richards/172251/172251_instruction-book_1834673004.webp)
4
Features
A
⁄
Water Tank Lid
¤
Removable Water Tank
‹
Ready Indicator light
›
Espresso Button with Indicator
fi
Cappuccino / Froth Button with Indicator
fl
Latte Button with Indicator
‡
A
Brew Head
‡
B
Filter Holder
·
Cup Height Adjustment
‚
Drip Tray
„
Milk Tank
‰
Power On/Off Switch O/I
Â
Milk Frothing Direction Lever
Ê
Milk Dispensing Nozzle
Á
Milk Frother Control Knob
Ë
Milk Tank Lid
È
Filter Retention Clip
Í
Filter – single shot
Î
Filter – double shot
Ï
Measuring spoon / tamper
Before first use
Clean and prime the unit prior to first use.
1
Remove orange cap from the base of the water tank before first use.
1
Please make sure the unit is off by pressing the power switch (11)
located on the side of the unit to ‘O’. Make sure it is unplugged
from the socket.
2
Remove and wash in a mixture of mild detergent and water the
water tank (2), milk tank (10), filter holder (7), filters (17 & 18) and
measuring spoon (19). Rinse thoroughly before placing them back
into the unit.
DO NOT
immerse the appliance in water.
To prime unit.
Run the steam cycle for 90 seconds as follows: -
1
Fill the removable water tank (2) (see using your coffee maker).
2
Fill the milk tank (15) with water.
3
Select one of the filters (18 & 19) and place it in the filter holder
(7). Locate the filter holder in the unit ensuring it is properly locked
and place a cup underneath.
Note:
Ensure the angle of the milk dispensing nozzle (13) is
directed at the cup.
4
Plug the appliance into the socket.
5
Turn the power button (11) on.
6
The four control panel lights will flash (3,4,5 & 6). When the lights
remain solid, press the cappuccino button twice in quick
succession.
7
Steam will be emitted from the nozzle followed by water flow from
the filter.
8
When the process is complete, the three control panels will turn on
solid.
The product is now ready to be used.
Using your coffee maker
Filling the water tank (2)
•
Remove the water tank lid (1) and fill the water tank (2), use either
a jug to fill while the tank is in situ or remove the tank from the
unit and fill under the tap with the desired amount of water within
the“MIN” and “MAX” markings on the tank.
Never use warm or hot water to fill the water reservoir
•
Close the water tank lid (1) and place it back in the unit ensuring it
is located correctly.
Filling the milk tank (15)
•
To prepare cappuccino or latte, remove the milk tank (15) from the
unit and open the lid (16).
•
Pour the quantity of cold milk you estimate you will need into the
tank within the “Min” and “Max” levels.
•
Replace the lid and the milk tank onto the unit ensuring it is
located correctly.
Note:
Whole milk, low fat milk, organic or soy milk are all suitable
for use in this product.
Choosing the filter
B
Select the filter to be used as follows:
For a single shot
– use the single shot filter (17) of espresso
coffee
For a double shot or two single shots
- use the double shot
filter (18) of espresso coffee.
Filling with coffee
Place the selected filter in the filter holder (7) as follows:
2
Fill the filter with fresh, fine ground espresso coffee to the MAX line
inside the filter (do not overfill).
3
Tamp and compress firmly.
4
Clean any excess coffee from the rim to ensure a proper fit of the
filter holder under brew head.
5
Position the filter holder underneath the brew head and attach the
filter holder by first moving retainer clip (16) back.
6
Position the filter holder so that the handle lines up with the open
lock icon
on the unit and fits into the groove.
7
Slowly turn it to the right until the retainer clip (16) is aligned with
the closed lock symbol
on the unit.
Locating the Cup/s
a
Pull out the height adjustment tray (8) if you are using a small
demitasse cup for espresso.
b
Leave the height adjustment tray inside its compartment if you are
using a larger cup to brew cappuccino.
c
Keep the height adjustment tray inside its compartment if you are
using a larger cup to brew latte.
NOTE: When making cappuccino or latte, adjust the milk
dispensing nozzle (13) until it is directed towards the cup.
Selecting the Right Cup
Before preparing your beverage, please make sure to select the
correct cup size.
CM172251MMY Rev1.qxp_Morphy Richards - Instruction Book 18/08/2017 16:13 Page 4