Control panel
To set the clock
• Press the ’PROG’ button once, and the
‘CLOCK’ text will appear in the display.
• Press the ‘HOUR’ and/or ‘MIN’ buttons
to set the desired time.
• If no buttons are pressed, the display will
revert to the time display within 10
seconds.
To set ‘wake up’ time
• Press the ‘PROG’ button twice, and the
‘TIMER’ text will appear in the display.
• Press the ‘HOUR’ and/or ‘MIN’ buttons
to set the desired time when the
machine should start to brew the coffee.
• When the required ‘wake-up’ time is set,
to exit, press the ‘PROG’ button once
until the display reverts to the time
display.
• If no buttons are pressed, the display will
revert to the time display within 10
seconds.
NOTE: The machine will not start
automatically brewing the coffee,
unless the automatic ‘wake-up’ is
set on AUTO. (See instructions
below)
To brew using the automatic
‘wake up’ timer function
NOTE: The automatic brewing
function will work only if the time
and the “wake up’ time are set.
Remember to fill the tank with the
amount of water required and
permanent filter with coffee too.
• To activate the automatic ‘wake up’
brewing function press twice or until
the green light AUTO turns on.
In this mode the coffee maker will turn
on at the pre-set time and start to brew
the coffee.
• To cancel the automatic ‘wake up
brewing function press the once or
until the green light AUTO turns off.
Note: When the pre-set brewing time is
reached the machine will automatically
switch to brew mode;to switch off the
machine press the button until both
lights (RED and GREEN) are off.
CLOCK
TIMER
ON
AUTO
PROG
HOUR
MIN
5
Red light
Green light
47039 rev1 7/2/06 8:45 AM Page 5
