1.
2.
3.
Saving a preset is simple:
Choose which loops you would like to be engaged in your preset. Do so by pressing on switches A to E. If a switch is lit, that particular
loop is engaged. In the image above, loops A, C and D are engaged.
Press the Learn button. The Learn button will blink, indicating that the ML5 is in Learn mode.
Send a Program Change message of your choice from your midi controller. The Learn button will flash quickly, indicating that your preset
has been saved. The selected loops will be engaged every time the ML5 receives the chosen PC message.
Global Settings
MIDI Channel
Hold down
while powering up the ML5. Once the ML5 is powered up, release Switch E. The Learn button will flash quickly and
Switch E
continuously.
Then perform any of the following:
Function
Description
Switch A
Omni. The ML5 receives messages on all MIDI channels.
Switches B to E
Sets ML5 MIDI channel to 1,2,3 or 4 respectively
Send PC/CC message
Sending a PC or CC Midi message to the ML5 through a particular
MIDI channel sets it to that MIDI channel.
Muted Switching
The ML5 circuit is designed to keep switching noise to a bare minimum. However, you may have certain devices that are more prone to switching
noise, such as devices that use an internal charge pump.
The ML5 has a muted switching function for pedals that may produce noise or a pop sound when engaged/disengaged in an audio loop. The
audio mute can be applied to specific loops, such that the signal mutes only when those loops are being switched. The audio mute is applied to
all loops in the factory default settings.
To edit your muted loops, simply hold down
before powering up your ML5. Once the Learn button is lit, release the switch, and the
Switch D
Learn button will blink continuously. Also, loops that have are programmed to be muted will engage (blue LEDs will be lit). From here, simply
select the loops you want muted, and then press the Learn button to save the settings.
Muted Switching Timing
Choose what channel you want the ML5 to receive MIDI messages on.
Hold down
Switch D
before powering up.