MIDI In
Where the MC6 receives MIDI messages from other MIDI devices.
The MC6 can receive MIDI messages via its MIDI in port and relay them out through its MIDI outputs (all MIDI message types) and USB port
(only PC, CC, Note and MIDI Clock) .
MIDI Out
Where MIDI data is sent from the MC6 to other devices. Use a standard 5-pin MIDI cable. To phantom power your MC6, you can also use a 7-pin
cable if you have a device that provides phantom power via pins 6 & 7.
USB
Send and receive MIDI via USB. This allows you to control your DAWs, plugins and other music software. All Morningstar controllers are USB
class compliant and compatible with Windows, macOS, Android and iOS.
The MC6 can receive MIDI messages (only PC, CC, Note and MIDI Clock) via USB and relay them out through its 5-pin and 1/4 inch MIDI
outputs.
9VDC
Where the MC6 receives 9v DC centre negative power.
EXP 1 and 2 - Omniports
Omniports are multi-function ports found on our MIDI controllers. Each port can be configured to work as any of the following:
TRS MIDI Output (configurable to send via the tip or ring to suit all pedals) or
TRS Expression Pedal Input or
TRS Aux Switch Input (up to 3 switches per port)
You should only use
. Using Mono cables will cause the device not to work as intended.
stereo cables
Please note that these ports cannot be used to control functions like amp switching, sending analog tap tempo or for Control Voltage. You should
only be connecting expression pedals, aux switches and MIDI devices to these ports.
Applying power to the Omniports may damage your Morningstar controller.
