Meter Hub Operator’s Manual
17
4.0 Operation
After the Meter Hub has been mounted and wired into the network, there
are few operator tasks to perform. This section provides information
pertaining to the normal operation and maintenance of the Meter Hub.
4.1 Status LEDs
Five
Status LEDs
indicate proper network connection to each port. The
Status LED on Port B indicates power status for the Meter Hub. The
Meter Hub must be powered through Port B for correct operation.
Status LED ON (Green)
The port is powered with a correct network connection.
•
Status LED OFF
No devices are connected to the port
•
A device that supplies power is not connected to the port (see
•
table 1 on page 11)
There is a wiring error or broken network cable
•
NOTE:
Devices listed in column Y of table 1 cannot be the only devices connected to ports 1-4,
or port B.