Thank you for purchasing this Morley® All Analog
Multi-FX. We hope you enjoy playing it as much as we
enjoyed making it.
POWER REQUIREMENTS
Your Morley® AFX-1 is designed to be powered by a Truetone One Spot power
supply; 9V 1700mA Center Polarity Negative. The adapter is included with the
AFX-1. Use of any other brand adapter is not recommended. The AFX-1 does NOT
have a battery option.
FEATURES
Optical & Switchless Wah
Classic Wah Tones
Analog Hi-Gain Distortion
Pre/Post Gain
High, Mid, Low Tone Controls
Standard or Hi-Gain Mode with Boost
Smooth Analog Chorus
Rate and Depth Controls
Mono or Stereo Mode
Analog Echo Slapback to Hall
Echo, Repeat and Mix Controls
OTHER COOL FEATURES:
Custom Buffer Circuit
Mono & Stereo Outputs
FX Loop
Glow-in-the-Dark Treadle Grip on Wah
Unique LED Indicators for Each Mode
Power Adapter Included
Proudly American Made
Cold Rolled Steel Housing
Custom Hand-Crafted Finish
12.5” Length x 8” Width x 2.75” Height
5 lbs
CLASSIC WAH
1. SWITCHLESS WAH: Simply step on to engage Wah and step off to go to bypass.
2. OPTICAL WAH: No more pots to get scratchy or replace.
3. CLASSIC WAH TONES: Enjoy the traditional Wah tones of our Morley Classic Wah.
4. LED INDICATION: Red LED lights when in Wah mode.
DIAMOND DISTORTION
5. DISTORTION SWITCH: Turns on/off Distortion Effect.
6. LED INDICATION: Blue LED Lights when in Distortion mode.
7. PRE KNOB: Controls the Input Gain, this determines the amount of distortion.
8. POST KNOB: Controls the Output Gain, this acts as the Distortion Level.
9. LOW EQ: Controls the lower frequencies of the Distortion.
10. MID EQ: Controls the middle frequencies of the Distortion.
11. HIGH EQ: Controls the higher frequencies of the Distortion.
12. HI GAIN SWITCH: Turns on/off Hi Gain Distortion Mode.
13. LED INDICATION: Green LED lights when in Hi Gain mode.
14. HI GAIN KNOB: Controls amount of Saturation in Hi Gain Mode.
CRYSTAL CHORUS
15. CHORUS SWITCH: Turns on/off Chorus Effect.
16. LED INDICATION: Orange LED lights when in Chorus mode. Also Orange LED
blinks in time with Chorus Rate.
17. RATE KNOB: Controls the speed of the Chorus.
18. DEPTH KNOB: Controls the amount of pitch-shifting and delay in the Chorus.
NOTE: The full Chorus signal is sent to both Left / Mono and Right / Stereo Jacks.
EMERALD ECHO
19. ECHO SWITCH: Turns on/off Echo Effect.
20. LED INDICATION: Yellow LED Lights when in Echo mode.
21. ECHO KNOB: Controls the Echo Time from Slapback to Hall.
22. REPEAT KNOB: Controls the amount of repeats.
23. MIX KNOB: Controls the mix of original “dry” signal and echoed “wet” signal.
NOTE: The full Echo Signal is sent to the Left / Mono jacks. When using Echo in
Stereo Mode, Echo will be present on Left / Mono Jack (”wet”) but Right /
Stereo Jack will be without Echo (”dry”). This creates a wide sonic spectrum
that make the sound seem Larger Than Life!
OTHER FEATURES
24. PREMIUM BUFFER: Ensures no signal loss or tone change even when using long
cables. Buffer is always engaged.
25. MONO / STEREO OUTPUTS: Use in Mono by using Left Output Jack or use in
Stereo using both Left and Right Jacks.
26. FX LOOP: Place other effects between the Distortion and the Chorus.
27. TREADLE GLOW: Patented Glow-in-the-Dark Treadle Grip allow you to always
locate your pedal, even on a dark stage.
28. MADE IN THE USA: Designed and Built in Carpentersville Illinois.
29. STEEL HOUSING: Built like a tank.
30. CUSTOM HAND-CRAFTED FINISH: Each pattern was created by hand one by one
for a unique and awesome looking design.
1
2
3
4
6 5
8 14 7
11 10 9
13 12
16 15
18
17
20 19
22
21
23
24 25 26 27 28
29 30
Page 1
Page 2
See Page 2 for Feature and Control Explanations
