Fe
se
www
tral detergent to wipe off the
~~
Main
Unit :
Use a soft cloth with a
little
neu
h water.
enclosure.
Rinse the soap off with a damp clot
[ CAUTION ]
Do
not use surface disinfectants
like
G
leave a residue on the main enclosure an
of these chemicals on the Root ZX wipe them 0
der free of debris and chemicals.
h moistened wit
These chemicals will
imilar chemicals.
and
ccidentally spill
any
and corrosion.
If you a
with
cloth.
juteraldhyde, Ethanol,
d cause discoloration
ff immediately
Keep the metal end of the file hol
5.
Disinfection
& Sterilization
Wipe the probe with a cloth soaked in alcohol.
*
The file holder and contrary electrode may be autoclaved.
(Do not autoclave any other parts. )
File Holder
Electrode
6.
Cautionary Remarks
Z\ WARNING
©
Do
not use this
unit
in
conjunction
with
an ele
patients who have a pacemaker.
ctric scalpel or on
Remove the back cover to install the
5
Batteries.
For easy
installation,
put the
negative
(
©
)
end
of the
battery
in
first.
Do
not
reverse
the
positions
of
the
negative
(
©
)
and
positive ( ® ) ends of the battery.
%
Replace the batteries when the bar graph of batteries power
indicator gets down to the last two
lines.
Accurate
readings
cannot be obtained with batteries which are low on power.
Never
use a
mixture of alkali
and
manganese
batteries or of
old and new batteries.
Always remove the batteries when the unit is not in use for long
periods or during shipping.
Use
files and reamers which have plastic ( resin ) handles.
Always attach the file holder to an upper part of the file near the
handle.
The
metal and
plastic parts of the file
holder can
be
damaged if they are attached to the file’s cutting part or the
transition from round shaft to cutting part.
Handle
Reamer
Cutting Part
* Do not clip
holder her
Make sure the probe plug is securely plugged into its jack. A poor
connection can prevent measurement.
Metal Part of File Holder
Probe Plug