A-16 OPERATION PANELS
<Option panel>
<M type>
For the M type machines, the following switches and status indicators are provided on the option
panel.
1.
Since this machine has no Y-axis specification, the switches and the indicator related
to the Y-axis are not used.
2.
The STATUS indicators at the turret 2 side are not used with this machine.
5-2
Head Selection Switches
The HEAD CHANGE switches are used to select the
turret to be operated between turret 1 (upper turret) and
spindle 1 (left spindle), and turret 2 (lower turret) and
spindle 2 (right spindle) in the manual operation mode.
They are also used to select the process when inputting
or editing a program as well as to select the turret and
display screen in the memory mode operation.
Because the machine has only one display screen, these
switches are used to select the machine units (spindle,
turret) for which the data/information is displayed on the
screen.
These switches are not operative when the
PANEL key-switch is placed in the
(OFF)
position.
PANEL
OFF
ON
PANEL
/EDIT
5-3 "Panel Key-Switch [PANEL]"
NOTE
Y
C
Y
2
Y
C
+C
C
Y
1
AXIS
DIRECTION
STATUS
MILLING
SP
MIL
UCL
CL
5-19 "Milling Switches
[MILLING] (M Type)"
1
2
NOTE
