Morgana Documaster Pro, Руководство оператора

Страница: 16 / 47

Page 14
CREASING / BOOKLET MAKING
EDGE & CORNER STAPLING
FIGURE 20
Optional Third Staple Head for
Corner Stapling
Note:
Corner stapling is only possible if an optional third staple
head is fitted (see Figure 20).
ORGANISING THE Loading the Motorised Infeed
JOB The staples will be inserted into the feed edge of the set.
The sheets should therefore be loaded accordingly, i.e
feed the set spine-first into the unit.
Note: The maximum sheet width that can be
edge stapled is 250mm, 9.84".
Select Edge Stapling
Using the lever on the BMP (see Figure 21), select edge
staple operation (push down).
Note: This will automatically switch off the fold and trim
actions.
Select the Staple Heads
Select the required staple heads using the staple head
selection button next to the lever (see Figure 21). The
staple head indicator lights show which heads are
selected.
For edge stapling, select the two centre staple heads.
For corner stapling, select the third head only.