Morgana AutoCreaser 50, Руководство оператора

Страница: 9 / 35

Page 9
SYSTEM
AutoCreaser 50
Quick Start Guide
Setting the machine to operate in automatic mode
1. Set the gap between the paper gate and the vacuum roller to
approximately twice the thickness of the stock to be creased.
3.
Place the stock to be creased onto the loading table against the
fixed side lay.
4.
Release the clamps on the adjustable side lay and slide up to the
paper stack allowing a gap of approximately 0.5mm (1/64 inch)
between the paper and the side lay.
5.
Position the backstop and slide it up to the paper stack, also allowing a
gap (as stated in the above step).
Turn the Emergency Stop button clockwise to switch the power on.
The display unit is now illuminated, a typical start up display menu is
shown below.
The arrows on the display denote the direction in which the selection
switch must be moved in order to access the various sub-menus.
NOTE:-
2.
2 Creases Program 3
Total 20
Zero
Setup
Tools Feed
Batch Off