Morgan PLUS FOUR, Руководство пользователя

Страница: 34 / 74

31
HEATING, VENTILATION AND AC
Air Conditioning (AC)
The Air Conditioning system on the Morgan Plus Four is switched on using
the push switch located on the instrument panel. The AC button lights up
when activated. In order for the AC to operate the engine must be running. To
have refrigerated air supplied to the cabin turn the temperature control to the
cold setting with the AC switched on. To supply dehumidified air to the cabin,
have the temperature control turned to a warm setting with AC switched on.
Conditioned air is supplied to the cabin via the outlets in the heater unit.
Temperature Control
To control the temperature of the air being supplied to the cabin, rotate the
knob located on the instrument panel. Turn the knob clockwise to increase the
temperature of the supplied air and anti-clockwise to reduce the temperature of
the supplied air. When Temperature Control is activated an icon will appear for
a few seconds in the Driver Information Panel.
Fan Speed
A rotating knob, located on the instrument panel, controls the rate at which air is
supplied to the cabin. Rotate anti-clockwise to stop/reduce the flow of air, rotate
clockwise to start/increase the flow of air.
Ventilation Distribution
The direction of air being supplied to the cabin is controlled using the vents
located centrally under the dashboard and in the footwells. The under dashboard
vents can be angled to control the direction of the air and can be shut off to
prevent air ventilation coming into the cabin from the heater unit. To activate air
ventilation into the footwells, press the Footwell Vent Switch on the dashboard.
STARTING PROCEDURE
Before attempting to start the car, make certain that the handbrake is fully applied.
Do not operate the accelerator pedal when starting the engine. Turn the key and
ensure that the ignition/steering lock is free.
Never allow the car to move with the steering lock engaged.
To start the Morgan Plus Four, turn the key to the second position and press the
Start button once to turn on the ignition. Once the ignition is on, depress the brake
pedal and press and hold the start button to start the engine. Release the button
as soon as the engine is running.
If the engine still fails to start, switch off the ignition and consult your nearest
Morgan dealer.
NOTICE Continued operation of the starter will discharge the battery and
damage the starter.
WARNING Carbon Monoxide is dangerous. Do not breathe exhaust gases,
which contain Carbon Monoxide. Before starting any car, be sure that there
is sufficient ventilation to allow gases to escape.
Warming Up
As soon as the engine is running and the instruments are reading correctly, the
car may be driven. The tick-over will be adjusted by the fuel injection and may run
a little higher than normal while the engine is cold. The idle speed is adjusted by
the engine ECU and may run a little higher than normal when the engine is cold.
NOTICE Avoid harsh acceleration or labouring at all times, but especially when
the engine is cold. It is recommended that the car be driven carefully until the
normal running temperature is reached.