5
4
PARTS IDENTIFICATION
SPECIFICATIONS
BEFORE FIRST USE
Before first use, it is recommended to
•
Before assembling the appliance, ensure the power cord is unplugged from the power supply and the
speed selector is locked to the “0” position.
•
Clean the beaters, dough hooks and bowl.
1. Align the hole below the back of the hand mixer with the tuber positioned on top of the base and
press down vertically with a little force.
2. Ensure it is assembled correctly
(see Fig.1)
. To detach the hand mixer, push it in the direction of the
arrows as
(see Fig.2)
.
3. Hold and tilt the head of the mixer and press the base switch
(see Fig.3)
.
4. Select the proper attachments based on the task to be performed and assemble it in position.
5. Beaters are for mixing egg white or mixing other liquid.
6. Dough hooks are for kneading the dough.
Note: For beaters and dough hooks, those with gears can only be inserted into the socket
with graphics while the other one can only be inserted into the other socket. The two beaters
and two dough hooks cannot be inserted in reverse.
7. Insert the ingredients to be blended into bowl and secure the bowl into position.
8. Lower the mixer head and press the base switch
(see Fig.4)
.
9. Ensure that the speed selector is locked to the “0” setting & connect to power supply.
10. Set the speed selector to the desired setting and the appliance will start working.
11. There are 5 speed settings and highest speed will be achieved when the turbo button is depressed
at any time.
Warning: Do not place knife, metal spoon, fork and so on into bowl during operation.
12. Do not exceed the maximum operation time of 10 minutes. Allow the appliance to cool down
between two consecutive cycles.
13. For kneading yeast & dough, operate at low speeds first and switch to higher speeds to achieve the
best results.
Note: During operation you may turn bowl with hand to achieve the best results.
14. When mixing is completed, turn the speed selector to “0” position & unplug power cord from the
power supply
15. If necessary, scrape any excess food residues from the beaters or dough hooks with a spatula.
16. Lift the mixer head, hold the beaters/dough hooks with one hand and press the ejector button firmly
down with other hand to detach the beaters/dough hooks.
Important: Remove the beaters/dough hooks only when locked at the “0” setting.
17. The hand mixer can be used separately without the base in position.
18. Do not operate the appliance for other than its intended use.
Fig.1
Fig.2
Fig.3
Fig.4
Bowl
Dough Hooks
Lower base
Lock Button
Upper base
Release button
Beaters
Ejector Button
Handle
Speed selector
Turbo button
MODEL MSM-NC300HM
RATED VOLTAGE / FREQUENCY 220-240V~ 50-60Hz
RATED WATTAGE 300W
CAPACITY 3.4L
