4
IMPORTANT SAFEGUARDS
5
BEFORE FIRST USE
OPERATING INSTRUCTIONS
IMPORTANT!
•
Ensure water level is between the MAX and MIN levels.
•
During operation and afterwards, the appliance’s accessible surfaces will get very hot.
The heating element surface is subject to residual heat after use.
•
Always hold the appliance by the handle.
•
Do not overfill the kettle as boiling water may be ejected during operation.
•
Always ensure the lid is closed and do not lift it when water is boiling to prevent scalding
or other injuries.
•
Use the appliance only on a level work surface.
•
Exercise extreme caution when moving an appliance containing hot water. Do not move
the appliance with the appliance still connected to the power supply.
PARTS IDENTIFICATION
SPECIFICATIONS
1
8
3
2
5
4
6
7
1. Lid
2. Spout
3. Lid release button
4. Handle
5. Kettle body
6. Power ON/OFF
switch with power
light
7. Power base
8. Water level marks
Model MJK-DW8218
Rated Voltage / Frequency 220-240V~ 50/60Hz
Rated Wattage 1850W
Capacity 1.8L
•
Before first time use, boil fresh water at least three times in the appliance. Use only water
without any additives or ingredients. Wipe the surface with damp cloth after boiling.
•
Completely unwind and untangle the length of the power cord at the bottom section of
the base.
•
Ensure that the voltage of your power supply corresponds to the one on the rating plate
found on the bottom of the appliance.
1. Place the appliance on a flat, stable surface.
2. Press the lid release button on the handle to open the lid.
3. Fill in desired water level between the MAX and MIX levels and close the lid.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the spout
when boiling.
4. Position the kettle onto the power base.
5. Connect the appliance to the power supply.
6. Switch on by pressing the Power ON/OFF switch. The power light will illuminate.
7. The appliance will power off automatically after the boiling has completed. The power
light will disappear.
8. After boiling, disconnect the power cord from the power supply and empty the contents.
IMPORTANT NOTES
•
Always power off the appliance before removing it from the power base.
•
Ensure to power off the power base before positioning the appliance.
•
Keep the lid tightly closed when dispensing water.
•
During operation the kettle body will become hot. Do not touch it and allow the appliance
to cool down before storing it away.
•
If the appliance is not used for long time, boil fresh water to MAX level mark 3-4 times
and discard before boiling for drinking.