CARE AND CLEANING
7
BEFORE FIRST USE
If you are using the kettle for the first time, it is recommended that you clean your
kettle before use by boiling a full kettle of water twice and then discarding the
water.
1. To fill water into the kettle, detach it from the power base and open the lid by lifting the
lid handle.
2. Fill with the desired amount of water into the kettle.
3. Always fill the kettle between the minimum (0.5L) and maximum (1.7L.) marks. Too little
water will result in the kettle switching off before the water has boiled.
4 Close the lid. Attach the kettle onto the power base. Ensure the kettle contacts with the
power base completely.
5. Connect the power plug into a power supply. Press down the switch to “I” position. The
power light will illuminate, and water will begin boiling.
6. The kettle will switch off automatically once the water has boiled and the power light
extinguishes. You can press the power switch to power off at any moment during boiling
water.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the spout
when boiling. Ensure that the lid is firmly in place before connecting the power cord to
the outlet.
NOTE:
Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle
will not turn off if the switch is constrained or if the lid is left open.
7. Lift the kettle from the power base to dispense water.
8. The kettle will not re-boil until the switch is released.
9. Allow kettle to cool for 15-20 seconds before reopening to boil water.
10. The kettle may be stored on the power base when not in use.
BOIL-DRY PROTECTION
Should you accidentally operate the kettle without water, the boil-dry protection will
automatically switch it off. Should occur, allow the kettle to cool down before filling with cold
water and re-boiling.
1. Always disconnect the appliance from the power outlet and leave it to cool down
completely before cleaning.
2. Never immerse the kettle or cord in water or allow moisture to contact with internal parts.
3. Wipe the external housing with a wild and damp cloth or cleaner.
4.
CAUTION:
Do not use chemical, steel, wooden or abrasive cleaners to clean the
appliance’s exterior.
5. Use only a dry cloth to clean the power base.
6. Never use abrasive cleansing agents, petrol, solvents, etc. to clean the kettle and the
power base.
DESCALING
1. Mineral deposits in tap water may cause the kettle interior to discolor.
2. To remove this build-up, use non-toxic Liquid Descaler.
3. It is recommended to remove water scale deposits regularly from inside the kettle based
on how frequently the kettle is used.
4. Fill the kettle with 3 cups of white vinegar and add to water.
5. Allow to stand overnight. Do not boil.
6. Empty the solution from the kettle the next day.
7. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.
8. Fill kettle with clean water, boil and then discard the water. Repeat and the kettle will be
ready for use.
NOTE: HOT WATER! Exercise extreme caution when dispensing water.
Do not open the lid when water inside the kettle is hot to prevent scalding.
NOTE:Ensure power supply is turned off when kettle is not in use.
CORRECT DISPOSAL OF THIS PRODUCT
This marking shown on the product or its literature indicates that it should not
be disposed with other household wastes at the end of its working life. In order
to prevent any possible harm to the environment or human health from the
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where purchasing this product from or
their local government office for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
6
OPERATION INSTRUCTIONS
