4
5
PARTS IDENTIFICATION AND SPECIFICATION
SAFETY PRECAUTIONS
Before starting the installation, consideration should be given to the difficulties to be found during
installation. Installation must be undertaken by a qualified and competent person conforming to the rules
concerning the evacuation of contaminated air. The manufacturer disclaims all liability for any damage or
injury caused because of not following the instructions for installation contained in the following text.
1. Always ensure that the appliance is disconnected from the power supply and allow it to cool down completely before
cleaning and do not unplug the appliance with wet hands.
2. Before connecting to the power supply ensure that the power voltage corresponds with the voltage on the rating
plate inside the hood.
3. Ensure that the installation of any earthing cable is not connected to water pipes, lightning rod or telephone lines to
avoid electric shock.
4. Ensure that the wall must have sufficient strength to support the weight of the appliance.
5. Ensure that the appliance is horizontally.
6. Distance between exhaust holes on the wall shall be less than 1.5m. Do not install the exhaust pipe too high to avoid
oil flowing backwards.
7. Ensure that the room is has adequate ventilation when operating the appliance.
8. The air exhaust from this appliance should not be channeled to the flue of burning gas or other fuels.
9. If the power cord is damaged, it should be inspected and repaired by a suitably qualified technician or returned to
the manufacturer for further action.
10. Always turn off the power supply when replacing lamps. New lamps must be the same specification as the current
ones.
11. It is dangerous to alter the specifications or to modify this appliance in any way. Do not tamper with it or attempt to
alter it in the attempt to customize it further.
12. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental
capabilities, or lack experience and knowledge, unless they have given supervision or instruction concerning the use
of the appliance by a person responsible for their safety.
13. Children should be supervised to ensure that they do not play with the appliance and its parts and accessories.
14. Educate children about the danger and safety rules associated with operating electrical appliance.
15. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged
in any manner. Repairs and services should only be carried out by suitably qualified technicians or by the authorized
service center.
1
2
3
4
5
Thank you for purchasing a quality MORGAN appliance. We trust that you will have a pleasant experience
with your new product. To guarantee safety and best efficiency, please read this manual carefully and keep
a copy for future reference.
DIMENSIONS
WIDTH (CANOPY) 900mm
HEIGHT (WITH CHIMNEY) 500+480mm
DEPTH (CANOPY) 500mm
SPECIFICATIONS
MODEL MDH-915ST
MATERIAL Stainless Steel + Tempered Glass
VOLTAGE / FREQUENCY 220-240V~ 50/60Hz
TRANSMISSION STYLE Single Motor
LED LIGHTING POWER (LAMP) 2 x 1.5W
CONTROL 3 Speed Touch Switch
FILTER Baffle Filter
MOTOR SPEED 3 Speed
MOTOR POWER 200W
EXTRACTION CAPACITY 1200m³/hr
1. Hood
2. Control Panel
3. Glass Panel
4. Lamp
5. Filter
MDH-915ST(IM)291216.qxp_Layout 1 12/29/16 5:01 PM Page 3
