Morgan Olson Amazon P80 2019, Руководство по обслуживанию

Страница: 6 / 81

6
Genuine OEM Parts 1.800.233.4823 www.morganolsonparts.com
Side Door Removal:
1. Remove the anti rattle clips.
2. Remove the 4 fasteners and the door handles (inner and outer).
3. Using a socket wrench, remove the bolts fastening the door and hanger assembly.
4. To simplify door removal, remove the grab handle located forward of the door.
*Fold side view mirror back.
5. Holding the top of the door in position, pull out on the bottom front corner of the door
until it clears the body of the truck. Then tilt the top of the door down and out and re -
move the door.
6. The upper track is mounted to the header channel. Remove the nuts, and the track.
Reinstall by reversing the removal sequence.
Weather Seal Removal:
1. The forward and rear weather seals are installed simply by sliding into a mated part. To
remove simply pull straight out from the top of the door or door frame. Install by feeding
into the mated part and sliding into place.
Handle Mechanism Removal:
1. To remove the door handles simply remove the 4 mounting screws. Pay special attention
to spacer locations. You can then remove the inside and outside handles. Remember
when installing the handles, position of the spacers identical to the way they were at
removal.
Wear Strip (Lower) Removal:
1. Remove side door.
2. Remove existing rivets.
3. Replace wear strip and rivet in place.