Moretti CN230, Инструкция по эксплуатации

Страница: 53 / 72

17
ENGLISH
1. Fold the backrest, pulling up the lever located on the left side of the seat, then stand behind
the scooter and, after pushing down the lever located below the seat (right side), with both
hands lift the seat from the seatpost (Fig. 5);
2. Remove the bolt+nut from the seat post rod, then adjust the seat post to the desired height,
reinsert and tighten the bolt+nut completely (Fig. 6);
3. Reinsert the seat in the seat post (Fig. 7).
WARNING!
Do not sit on the scooter or try to move it without first checking that the frame and
the rear trolley are firmly inserted. The frame could accidentally detach from the
trolley and cause injury or damage.
WARNING!
• Never sit on the scooter when the “free wheel” lever is inserted.
• Never disengage the stopping brake when you are using the scooter.
WARNING!
Always check that the stopping brake of the scooter is inserted before inserting the
key in the ignition and turning it to the ON position.
11.5 Wheel locking/unlocking function
The scooter has a lever to lock/unlock the wheels.
(Fig. 8)
Illustrative images
• To disengage the stop brake and unlock the scooter wheels, push the lever backwards towards
the letter N (Fig. 8).
• To engage the brake and lock the scooter wheels, push the lever forwards towards the letter
D (Fig. 8).
WARNING!
•
If the scooter is pushed too fast with the wheels unlocked, the engine will act like a
generator and make the scooter difficult to push;
• Do not place the scooter in unlocked wheels mode when you are on a slope;
• Never disengage the stopping brake when you are using the scooter;
•
Always check that the stopping brake of the scooter is inserted before inserting the
key in the ignition and turning it to the ON position.