Moretti ARDEA MOBILITY 220, Инструкция по эксплуатации

Страница: 52 / 72

16
ENGLISH
The seat can be adjusted using the seat post height adjustment.
1. Fold up the backrest by pulling up the lever on the left-hand side of the seat, then stand
behind the scooter and, after pushing down the lever on the underside of the seat (right-hand
side), use both hands to lift the seat off the rod (Fig. 5);
2.
Remove the bolt+nut from the seat rod, then adjust the seat to the desired height, reinsert
and tighten the bolt+nut (Fig. 6);
3. Reinsert the seat on the rod (Fig. 7).
WARNING!
Do not sit on the scooter or try to move it without first checking that the frame and
the rear trolley are firmly inserted. The frame could accidentally detach from the
trolley and cause injury or damage.
WARNING!
• Never sit on the scooter when the “free wheel” lever is inserted.
• Never disengage the stopping brake when you are using the scooter.
WARNING!
Always check that the stopping brake of the scooter is inserted before inserting the
key in the ignition and turning it to the ON position.
11.5 Wheel locking/unlocking function
The scooter has a lever to lock/unlock the wheels.
(Fig. 8)
Illustrative images
• To disengage the stop brake and unlock the scooter wheels, push the lever downwards towards
the letter N (Fig. 8).
• To engage the brake and lock the scooter wheels, push the lever upwards towards the letter D
(Fig. 8).
WARNING!
•
If the scooter is pushed too fast with the wheels unlocked, the engine will act like a
generator and make the scooter difficult to push;
• Do not place the scooter in unlocked wheels mode when you are on a slope;
• Never disengage the stopping brake when you are using the scooter;
•
Always check that the stopping brake of the scooter is inserted before inserting the
key in the ignition and turning it to the ON position.