Moretti Andea Mobility Taurus, Инструкция по эксплуатации

Страница: 46 / 79

20
ENGLISH
N° of LEDs
lit
PROBLEM SOLUTION
1
Faulty battery connection
or flat batteries Check the battery status and the connections.
Charge the batteries for at least 8 hours.
2 The left motor is faulty
Check the left motor and the electrical
connections.
3
The left motor is short
circuiting
Contact your usual retailer
4 The right motor is faulty
Check the right motor and the electrical
connections.
5
The right motor is short
circuiting
Contact your usual retailer
6 External interference
Check whether the battery charger is
connected or whether there is electromagnetic
interference
7
The joystick is faulty or is
not in the neutral position
Release the joystick and check that it is in the
central position. Switch off the wheelchair and
switch it back on again.
8 The controller is faulty Check all controller connections
9 Faulty brake Check the electrical connections of the motors
10
The controller receives
excess voltage
Check the battery status and the connections
18.1 Other problems
1) The electric wheelchair does not move when switched ON:
- Check battery charge level LEDs on the joystick.
All the LEDs should be switched on
- Check the self-diagnosis LEDs. They should be continually on.
If they flash, refer to the above table to solve the problem
- Check all the electrical connections to be sure they are correct
- Check whether the batteries are correctly connected
- If none of these suggestions help solve the problem, contact your usual retailer
2) If the charge lights do not turn green after charging the electric wheelchair for over
14 hours, contact your usual retailer
Remember that the electric wheelchair is equipped with an electronic system that constantly
controls the status of the driving system, to ensure safe driving. If an error occurs, the battery
charge LED will indicate the type of anomaly by flashing.