manualshive.com logo in svg

Morel SoundStand ST-95, Руководство пользователя и инструкции по установке

Поделиться
Скачать
Morel SoundStand ST-95 Скачать руководство пользователя страница 19

SoundSub

TM

RS 91-P

Thank you for choosing Morel's SoundSub

TM

 Subwoofer.

The SoundSub

TM

 RS 91-P are passive subwoofers, designed

to complement your system in the low bass range,
reproducing frequencies below 200 Hz. They are ideal for
complementing a stereo system with small speakers, or
satellite speakers that are incapable of reproducing the low
frequency notes due to their size.

The deep, dynamic bass reproduced by the SoundSub

TM

subwoofers adds an important dimension to the listening
experience, elevating the level of realism and boosting the
listener's emotional involvement.

Speaker Placement

The optimal location for the SoundSub

TM

 subwoofers is in front

of the listener, in between the two stereo speakers. The
SoundSub

TM

 can also be placed to the side of the listener, but

caution is required, as moving the subwoofer too far back may
impair the stereo imaging and acoustical balance of the system.

For optimal performance, we recommend you position the
subwoofer so that it is at least 10 cm (4") from the wall behind
it. The speaker will sound better if not positioned in a corner.

Содержание SoundStand ST-95























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды