Morel Ardon Bookshelf Speaker Kit
Thank you for purchasing the More Ardon bookshelf speaker kit. This speaker kit was precision
cut using CNC machinery for the best possible fit and finish. With a little time and patience, your
finished product will provide years of enjoyment. Please follow the following instructions for the
best possible results.
Suggested tools and consumables:
Drill
Rag or paper towels
5/64" drill bit
Solder
Wood clamps (you can never have too many of these)
Soldering iron
Sanding block and/or electric finishing sander
Hot glue gun
Wood glue
Polyurethane glue (Gorilla Glue)
0.11" female disconnect terminal
Cyanoacrylate Adhesive (super glue)
0.205" female disconnect terminal
Package contents:
First, empty the contents of the package and review parts to ensure everything has been included
and is in good condition. If any parts are missing or damaged please contact our customer service
department at 1-800-338-0531.
Note: Crossover components may be substituted with parts of equal of higher quality depending
on stock.
Components:
A)
Morel KW-1 6" Damped Poly Cone Woofer
B)
Morel KT-1 1-1/8" Neodymium Soft Dome Tweeter
C)
2" ID Adjustable Port Tube
